Description

Resistors for your turn signals

Discreet LED resistors in a very small design, encapsulated in ceramic so they dissipate heat very well, for mounting in extension of the wiring harness on your LED turn signals to reduce the flashing frequency if you have a normal turn signal relay.

The resistors are inserted into the existing wiring harness, with ground (minus) from the flasher and harness and plus from the flasher and harness, so that the current flows through the resistor to reach the flasher and vice versa.

These resistors are suitable when going from a 10 watt flasher bulb to LED.

Remember: resistors get hot due to the current they absorb. Therefore, mount them in a place where they do not risk melting anything and where there is plenty of air around them to cool them down.

Technical info:

• Number of wires: 4 – 2x ground, 2x plus
• 10 watts
• 21.5 Ohm

Which wires are what?

• Black: Ground
• Red: Plus

Note: One resistor may be needed per turn signal.