Description

Quick-drying primer for wood, metal and aluminium

MoTip Primer is an effective and quick-drying primer used for pre-treatment of wood, metal, aluminium, glass and stone before applying the desired colour. Not only does the primer ensure that the color binds better to the substrate, it also helps smooth out irregularities in the surface and at the same time acts as a rust-protective layer. MoTip Primer can be sanded down both while it is wet and while it is dry, so it is not difficult to create an even and uniform result without shields and unevenness. MoTip Primer comes in a can of 500 ml.

MoTip Primer – Your friend in need

If you need to repaint your scooter or just fix a few small scratches, MoTip Primer may very well be your friend in times of need. The primer provides a uniform surface with good adhesion, so you can once again proudly show off your shiny scooter.

Re-sprayable with all lacquer types

Start by shaking the MoTip Primer thoroughly and apply a thin, even layer to a completely dry, clean surface at a distance of approximately 25-30 cm. Repeat as needed, making sure to shake the can between each layer. Afterwards, let the primer dry. The drying time depends on the temperature. humidity and thickness of the varnish layer. Always clean the nozzle when you’re done to make sure it doesn’t clog. This is easily done by turning the can upside down, and then holding the nozzle inside for approx. 5 seconds.